Frequently Asked Questions
Comprehensive answers to common questions about calculating picket quantities, exact gap spacing, building codes, and lumber tolerances.
FAQ
Everything you need to know about fence picket calculation, building code gap limits, and layout math.
How do you calculate fence picket spacing?
+
Subtract the total width of all pickets (n × w) from the total clear span length L, then divide the remaining length by the gap count. For equal end gaps, gap = (L - n × w) / (n + 1). For flush ends, gap = (L - n × w) / (n - 1).
How much space should be between fence pickets?
+
Spacing between fence pickets typically ranges from 1.5 to 2.5 inches for semi-privacy fences, and 3.5 to 4 inches for traditional picket fences. For swimming pool enclosures, building codes mandate gaps under 4 inches (102 mm).
How do you space fence pickets evenly?
+
Calculate the exact required gap with our calculator, then cut a piece of scrap lumber to that exact gap dimension as a spacer block. Placing this spacer block between each picket during installation guarantees perfectly uniform gaps.
How many fence pickets do I need?
+
Divide the total fence length by the sum of one picket width and one target gap: n = (L - target_gap) / (picket_width + target_gap). Round to the nearest whole number and add 5% to 10% for waste.
How wide is a standard fence picket?
+
A nominal 1x4 wood picket is actually 3.5 inches (89 mm) wide. A nominal 1x6 picket is actually 5.5 inches (140 mm) wide. Always measure actual picket width rather than using nominal rack tags.
Launch the Fence Picket Calculator
Get your exact picket count, fraction measurements down to 1/16", and visual SVG layout diagram instantly.
Calculate Spacing →